How to use Fujifilm Instax Mini 9? [7-Steps Guide]

Written By TheTechTop10

Every article is rigorously researched & written by a Tech Expert and reviewed by Two Editors.

Fujifilm introduced an array of instant cameras from the cute and small Instax HELLO KITTY to Instax Square SQ20.  Today, I am going to show you how to use the Fujifilm Instax Mini 9 instant camera.

Fujifilm Instax Mini 9 instant camera is great for people who want the feel of a retro camera with Modern design and simple ease of use.

Instax Mini is a pretty popular model in the series which comes in various color versions. Also, using these cameras is pretty easy. Even a 10 year kid can click photographs using these cameras.

There is no rocket science behind the application of this camera for instant photographs. However, some people may find it hard to use it for the first time.

So, if you also have a question in mind that how to use Fujifilm Instax Mini 9, this article is going to help you. In fact, I have given my best to make this article as helpful as possible by keeping it short at the same time. So, without any delay, let’s get started.

Before doing anything else, let’s have a look at the official Fujifilm Instax Mini 9.

Fujifilm Instax Mini 9 – mint green

Also Read: Top 10 Best Instant Cameras to Buy in 2021

How to Use Fujifilm Instax Mini 9?

1. Fujifilm Instax Mini 9 Unboxing

The Instax Mini 9 Box comes with:

  1. Mini Camera
  2. 2 AA Batteries
  3. A Close-Up Lens Attachment
  4. A wrist Strap
  5. A Starter guide

You will need to buy a film pack additionally which consists of two cartridges with 10 films in each cartridge, so you will have a total of 20 films in one pack. The Fujifilm Instax films also come in various color options like Standard Color film, Monochrome film, or Border design films. 

2. Batteries in the Instax Mini 9

Instax mini 9 uses the 2 AA Alkaline Batteries, which comes within that pack and those two batteries last for around 100 pictures. You can insert the batteries on the left side of the left side compartment as shown below in the screenshot. So, before knowing how to use your camera, you should insert your batteries in its battery compartment.

How to Insert Batteries?

Anyone with a little or no technical knowledge can insert the batteries inside this instant camera. Let’s see how you can do it.

inserting batteries in Fujifilm instax mini 9
inserting batteries in Fujifilm instax mini 9

3. Loading the Films in the Camera

After opening the Film pack you will find two cartridges. Open the first cartridges from its packaging and be careful not to touch or press it in the center as this may damage the cartridge.

Notice of the Yellow mark on the cartridge as shown in the picture below. Now, open the rear film compartment in the Mini Instax 9 and you will see a yellow marking on the top right corner.

Align the yellow mark of the cartridge with the yellow mark in the compartment and insert the film in the camera and close the lid.

loading the films
loading the films

4. Turning On the Camera

Now, you can turn on the camera, the on button is on the front side of the camera just right side below the Lens. When you press that button you will see the Lens coming out of the camera. Once it is turned on, it is almost ready to take pictures. The one thing you have to do before that is given below.

5. Removing the Black Protective film

Before you begin to take pictures, the film counter on the rear is showing the letter “S” like before, you need to press the shutter button once and then black protective film will come out. Now, you’re ready to take the pictures.

6. Adjusting the light

When you turn on the camera you can see an LED just on top of the Lens Barrel on the front side, it reads the ambient light around you and also the setting on which you need to keep the Brightness Dial.

All you need to do is rotate and match the dial pointer with LED so that it exposes the film to the right amount of light. The most common question we get is “How to adjust the light setting for the night in Instax mini 9?

All you need to do is set the dial to Hi-Key mode and it will take fine pictures at night also.

adjust the brightness
adjust the brightness

7. Taking Instant pictures

Now, just point the camera on the item you want to take the picture of and click the Shutter button. The camera will flash and will eject the film, it will take the film 2-6 minutes to fully develop the colors. 

get your photos
get your photos

I myself enjoyed it a lot and even my friends also bought Instax series cameras after they saw mine. It’s great for almost any event wherein you can take pictures and even selfies and share an instant print with your friends as a memory.

Also Read: Top 10 Best Portable Photo Printers in 2021

Final Verdict

I hope you have found this article helpful. I will suggest reading the whole user manual for a better understanding. I have also found a quite helpful YouTube video from Photography Concentrate. See if it can help you with the same.

Source: Youtube/Photography Concentrate

Thanks for Reading!

Leave a Comment

The Tech Top 10